Universal holder with heat sink for sugarcube cameras
Key Features
- Universal camera holder and heat sink for 29 x 29 mm sugarcube cameras, tested for Basler ace, ace 2, FLIR, IDSAVT-MAKRO, Opto Engineering – COE, LUCID, JAI Go and Go-X.
- Suitable for Gigabit Ethernet and USB 3.0 variants.
- Reduces the working temperature by up to 10 °C.
- Reduces camera thermal noise to improve image quality.
- Extends the life of the camera and its trouble-free operation.
- In confined spaces, only the bracket without side heat sinks can be used.
- Equipped with ¼” thread for tripod.
Product description
The camera holder with heat sink consists of three aluminum parts, which are fastened together by screw connections. The heat sinks side panels have milled ribs to maximize the cooling surface.
Thanks to oversize, the heat sink is also suitable for PoE cameras that are characterized by higher power dissipation. The surface finish of all parts is black matt anodized, which increases scratch
resistance while improving cooling efficiency by radiating heat to the surrounding area.
Universal camera heat sink for sugarcube cameras is designed to be easily used with the standard Balluff fastening system. For this purpose, 12 mm diameter mounting rod is used, which fits perfectly
into the fasteners (the rod for the camera holder is not part of the package, it can be purchased as an accessory under order number 62025004).
You can also find the holder with heat sink and accessories (rod) in our e-shop.
Product and accessories
| NAME | ORDER NUMBER |
|---|---|
| Universal camera holder for sugarcube cameras | 62025001 |
| Heat sink for sugarcube cameras | 62025007 |
| Rod M8 D12x40 mm | 62025004 |
Parameters
| Name | Value |
|---|---|
| Dimensions of the holder without rod | 10 x 29 x 51 mm |
| Heat sink dimensions | 51.2 x 39 x 51 mm |
| Length (excluding thread) x diameter of the rod | 30 x 12 mm |
| Camera front dimensions | 29 x 29 mm |
| Types of threads | M8, 1/4" |
| Holder weight | 35 g |
| Heat sink weight | 100 g |
| Rod weight | 9.48 g |
Download
| FILE NAME | DESCRIPTION | SIZE | |
|---|---|---|---|
| Catalogue sheet (CZ) | Universal camera holder for sugarcube cameras | 571 KB |
Download
|
| Datasheet (EN) | Universal camera holder for sugarcube cameras | 602 KB |
Download
|
| Catalogue sheet (CZ) | Heat sink for sugarcube cameras | 876 KB |
Download
|
| Datasheet (EN) | Heat sink for sugarcube cameras | 846 KB |
Download
|
| Catalogue sheet (CZ) | Rod | 398 KB |
Download
|
| Datasheet (EN) | Rod | 420 KB |
Download
|
Do you have any questions about the product?
Feel free to contact us directly or use the form below.
Cameras for industry and transport, manager
Filip Volný
Contact card
Cameras and Components Department
Products (e-shop)
Contact card
We will find a tailor-made solution for you
We have skills, tools and products to help you overcome challenges. Partner with us to move your projects forward!
Other products
Current source for LED testing
The current source is used to power and test individual LEDs or strings (modules) that do not contain their own electronics that provide current regulation.
Paint layer detection system
The system is designed to detect the presence of external hard coating (HC) and internal anti-fog (AF) coatings on automotive headlamp covers.
ATE-light
Flat lights for direct or back illumination with a durable mechanical construction suitable for industrial environments. Possibility to adapt the light to specific requirements.